剪切机的运动学分析

剪切机是工业生产中常用的设备，广泛应用于剪切各种材料。某厂使用的小型剪切机因生产需要将其改装成自动剪切设备，但理论上难以确定其最小剪切性能。笔者采用图解法对其进行运动和受力分析，得出在调速电机转速一定的情况下能够剪切的钢材直径，对生产使用具有较高的理论指导价值。     

A direct stiffness analysis of a composite beam with partial interaction

The use of the conventional semi-analytical stiffness method in finite element analysis, in which interpolation polynomials are used to develop the stiffness relationships, leads to problems of curvature locking when beam-type elements are developed for composite members with partial interaction between the materials of which it is comprised. The curvature locking phenomenon that occurs for composite steel–concrete members is quite well reported, and the general approach to minimizing the undesirable ramifications of curvature locking has been to use higher-order polynomials with increasing numbers of internal nodes. This paper presents an alternate formulation based on a direct stiffness approach rather than starting from pre-defined interpolation polynomials, and which does not possess the undesirable locking characteristics. The formulation is based on a more general approach for a bi-material composite flexural member, whose constituent materials are joined by elastic shear connection so as to provide partial interaction. The stiffness relationships are derived, and these are applied to a simply supported and a continuous steel–concrete composite beam to demonstrate the efficacy of the method, and in particular its ability to model accurately both very flexible and very stiff shear connection that causes difficulties when implemented in competitive semi-analytical algorithms. Copyright © 2004 John Wiley & Sons, Ltd.     

街面水电站混凝土面板堆石坝主要技术问题探讨

街面水电站拦河坝为混凝土面板堆石坝,在面板止水结构型式、面板防裂措施、上游面的施工方法、趾板开挖处理及趾板灌浆等方面,根据工程实际情况,结合国内外的新技术新工艺进行了探讨。     

天铁炼钢厂四流中间包流场的水模实验及优化

介绍了天铁炼钢厂中间包水模实验原理和过程，分析了斜、直、圆三种型式挡渣墙模拟结果，提出了合理的挡渣控流方案，在生产实践中使用效果良好。     

Modelling aerodynamic sound in the airways of a human body: A possible diagnostic tool

The sound generated aerodynamically by a pillow-like body simulating an obstacle in the human airway is observed through a soft wall from outside the duct. It is intended to provide a physical basis for an attempted medical diagnostic technique for detecting an obstacle by observing the sound during breathing. So far at least two kinds of sound have been identified: One is sound of the half-jet flow formed downstream of the obstacle, and the other is sound due to unsteady motion of the separation point on the curved surface of the obstacle. For simulating the flow condition downstream of the vocal cords during inhalation, cases with an obstacle at various positions relative to a jet flow are also examined. In this case, the sound due to the downstream obstacle exhibits a complicated dependence on the geometry and flow parameters. Nevertheless, increase in the sound, or more correctly, deformation in the sound power spectrum, due to the presence of an obstacle is detectable from outside, opening up possibilities of its use as a diagnostic aid. Dedicated to the late Professor Itiro Tani on the occasion of 5ACFM, Taejon, Korea     

HL-1M装置的真空运行与质谱诊断

通过对 HL- 1M装置真空运行模式、真空运行参数、氦辉光放电清洗和硅化壁处理手段等的规范化 ,显著地改善了装置的真空壁出气、本底杂质浓度、托卡马克放电杂质出气比和再循环 ,成功地实现了高参数放电、长脉冲放电和装置暴露大气后快速恢复放电 ,并成功地为演证低混杂电流驱动、离子回旋共振加热、电子回旋共振加热、中性束注入、弹丸注入和分子束注入实验和升级等离子体运行等提供了良好的真空壁条件。描述了 HL- 1M装置真空系统、壁出气和再循环控制、质谱诊断和程序脉冲送气等方面的主要实验成果 ,并为 HL- 2 A装置的真空系统研制和运行提供了有益的参考     

杏北开发区套损成因机理新认识及套损综合防治技术

阐述了杏北开发区通过对异常高压层、合理注水压力以及嫩二段底部岩心和岩电特征,在油层和非油层部位套损成因机理研究方面取得了新的认识.确定了杏北开发区油层、非油层部位套损的成因、易发生套损的具体位置以及套管损坏的形态.同时,依据取得的认识,在嫩二段底部成片套损防治、异常高压层的普查及治理、注水压力调整等方面采取了配套做法及治理效果,为杏北开发区今后的套损防治工作探索了新的途径.     

柴达木盆地断裂上下盘油气差异聚集效应与成因

断裂沟通含油气盆地不同层位、不同时代的烃源岩和生储盖组合，成为连接烃源岩和各种圈阔的重要渠道，导致了多种类型的与断裂有关的油气藏的形成。柴达木盆地的断裂控烃特征明显，断裂上下盘油气差异聚集现象十分普遍，不同构造系统区具有不同的油气差异聚集机理和模式。其根本原因是断裂上下盘具有不同的地质特征和油气运聚成藏条件，它们往往是互为消长的关系。油气是富集在断裂的上盘，还是聚集在断裂的下盘，取决于具体的地质条件。     

混凝土多孔砖裂缝防治措施

分析了混凝土多孔砖墙体产生裂缝的原因,并详细阐述了混凝土多孔砖墙体裂缝的防治措施.